Draytek Vigor 2832N-K

Physical Interfaces
LAN Ports (Switch)
4 X Gigabit Ethernet (1000Mb/s) Ports
Port-Based VLAN (Inclusive/Exclusive Groups)
802.1q VLAN Tagging
USB Ports:
2x USB 2.0 ports for 3G/4G Modem, Printer, USB storage or USB temperature sensor
WAN Ports:
WAN1 : ADSL, RJ11
WAN2 : Gigabit Ethernet (1000Mb/s) Ethernet
WAN3 : USB Port for 3G/4G Cellular Modem
WAN4 : USB Port for 3G/4G Cellular Modem
Performance
Firewall: Up to 300Mb/s
IPSec VPN: Up to 50Mb/s
ADSL Compatibility
ANSI T1.413 Issue2
ITU-T G.992.1 G.dmt (ADSL)
ITU-T G.992.2 G.lite
ITU-T G.992.3 ADSL2
ITU-T G.992.5 ADSL2+
Annex L (READSL)
Annex A
Annex M
ANFP Issue 3 Compliant/Certified (for Annex A & Annex M)
DSL Forum : TR-048/67 & TR-100
Load Balance/Failover Features
Outbound Policy-Based Load-Balance
WAN Connection Fail-over
BoD (Bandwidth on Demand)
Wireless LAN Features (\'n\' Models Only)
802.11n with backward support for 802.11b/g
2.4GHz operating frequency (UK channels 1-13)
Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
Optional Higher Gain or directional aerials available – Click Here.
Active Client list in Web Interface
Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
64/128-bit WEP Encryption
WPA/WPA2 Encryption
Switchable Hidden SSID
Restricted access list for clients (by MAC address)
Time Scheduling (WLAN can be disabled at certain times of day)
Access Point Discovery
WDS (Wireless Distribution system) for WLAN Bridging and Repeating
802.1x Radius Authentication
Wireless VLAN
Wireless Rate-Control
Automatic Power Management
802.11e WMM (Wi-Fi Multimedia)
Firewall & Security Features
CSM (Content Security Management):
URL Keyword Filtering – Whitelist or Blacklist specific sites or keywords in URLs
Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
Prevent accessing of web sites by using their direct IP address (thus URLs only)
Blocking automatic download of Java applets and ActiveX controls
Blocking of web site cookies
Block http downloads of file types :
Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
Time Schedules for enabling/disabling the restrictions
Block popular P2P (Peer-to-Peer) file sharing programs
Block Instant Messaging programs (e.g. IRC, MSN/Yahoo Messenger etc.)
Multi-NAT, DMZ Host
Port Redirection and Open Port Configuration
Policy-Based Firewall
MAC Address Filter
SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
DoS / DDoS Protection
IP Address Anti-spoofing
E-Mail Alert and Logging via Syslog
Bind IP to MAC Address
Bandwidth Management
QoS (For devices in the NAT subnet according to source or destination IP)
Guaranteed Bandwidth for VoIP
Class-based Bandwidth Guarantee by User-Defined Traffic Categories
Layer 2&3 (802.1p & TOS/DCSP)
DiffServ Code Point Classifying
4-level Priority for each Direction (Inbound / Outbound)
Bandwidth Borrowed
Temporary (5 minute) Quick Blocking of any LAN Client
Bandwidth / Session Limitation
Network/Router Management
Web-Based User Interface (HTTP / HTTPS)
CLI ( Command Line Interface ) / Telnet / SSH
Administration Access Control
Configuration Backup / Restore
Built-in Diagnostic Function
Firmware Upgrade via TFTP / FTP
Logging via Syslog
SNMP v3 Management with MIB-II
TR-069
TR-104
VPN Facilities
Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
Tunnelling Protocols:
PPTP
IPSec
L2TP
L2TP over IPSec
DrayTek SSL
IPSec Features:
Internet Key Exchange : IKEv1 (Main and Aggressive mode) & IKEv2 NEW!
Security Protocols : AH mode, ESP mode
DiffieHelman (DH) Groups:
IKEv1 : 1,2,5,14
IKEv2 : 1,2,5,14,19,20,21
Encryption:
DES / 3DES (168bits)
AES (128/192/256bits) – Hardware-Accelerated
Authentication – Hardware-Accelerated:
MD5
SHA-1
SHA-256
IKE Authentication : Pre-shared Key or X.509 Digital Signature
DHCP over IPSec
NAT-Traversal (NAT-T)
Dead Peer Detection (DPD)
SSL VPN for teleworkers – Up to 16 simultaneous users. Proxy or tunnel
LAN-to-LAN & Teleworker-to-LAN connectivity
MOTP (Mobile One Time Password) for two factor authentication (2FA)
Virtual IP Mapping, map a remote IP subnet/range to another range to resolve IP subnet/range conflicts
VPN Pass-Through
Network Features
DHCP Client / Relay / Server
DHCP Option 66 support
Dynamic DNS
NTP Client (Synchronise Router Time)
Call Scheduling (Enable/Trigger Internet Access by Time)
RADIUS Client
UPnP Support
Routing Protocols
Static Routing
RIP V2
Vigor 2832 ATM Protocols (DSL)
RFC-2684/RFC-1483 Multiple Protocol over AAL5
RFC-2516 PPP over Ethernet
RFC-2364 PPP over AAL5
PPPoE pass through LAN/WLAN
PPPoE/PPPoA Relay
Transparent bridge for MPoA
Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
Support for RFC4638 for MTU up to 1500
WAN Protocols (Ethernet)
DHCP Client
Static IP
PPPoE
PPTP
BPA
Operating Requirements
Rack Mountable (Optional Vigor RM1 mounting bracket required)
Wall Mountable
Temperature Operating : 0 °C ~ 45 °C
Storage : -25 °C ~ 70 °C
Humidity 10% ~ 90% (non-condensing)
Power Consumption: 18 Watt Max.
Dimensions: L240.96 * W165.07 * H43.96 ( mm )
Operating Power: DC 12V (via external PSU, supplied)
Warranty : Two (2) Years RTB
Power Requirements : 220-240VAC